SPORTSMAN ULTRA LIGHT HD™ .46 SILENCER

The Sportsman Ultra Light HD™ .46 is a lightweight, affordable suppressor designed to deliver a hunting suppressor that has everything you need, and nothing you don’t. Full 17-4 Stainless Steel construction brings a new paradigm of durability to the Sportsman Ultra Light family of suppressors, hence the HD (High Durability) designation. Tubeless laser-welding, a silencer technology pioneered by Griffin, affords near-titanium weights using much more durable 17-4 H900 heat-treated stainless steel.

The original Sportsman Ultra Light Suppressors were aluminum in construction, and had to be relegated to sporting use only allowing a handful of rounds to be fired in quick succession then allowed to cool. The Sportsman Ultra Light HD™ series does away with these restrictions, providing of peace of mind to hunters knowing their suppressor can handle whatever they throw at it. This added durability allows end users to dial in their hunting rifles without needing to break for suppressor cooling, as was the case with the previous, aluminum Sportsman suppressors.

Sportsman Ultra Light HD™ suppressors feature Griffin’s patented ECO-FLOW™ baffle technology to minimize user exposure to toxic gases, and decrease system gas to allow better functioning on gas-operated hosts. Industry-standard 1.375×24 HUB threading allows users to utilize any HUB mount adapters from Griffin as well as other manufacturer’s mounting systems if desired. This .46cal suppressor can also accept Nielson devices (booster housings) to be run on up to .45cal Browning-style tilt-barrel pistols.

Sportsman Ultra Light HD™ suppressors are machined in Griffin’s Watertown, Wisconsin facility by freedom loving Americans.

This suppressor is compatible with Griffin and other manufacturer’s 1.375×24 HUB mount adapters, and booster housings for use on tilt-barrel pistols up to .45 ACP. 

NOTE: The Sportsman Ultra Light HD™ .46 Suppressor DOES NOT COME WITH A MUZZLE DEVICE OR HUB MOUNT INTERFACE. Muzzle Devices and HUB Interfaces for optional mounting systems must be purchased separately.

MOUNTING OPTIONS AVAILABLE:

Sportsman Ultra Light HD™ Suppressors are HUB-compatible with any of Griffin’s 1.375×24 HUB Interfaces, as well as many other manufacturer’s inserts. Mounting interfaces may be chosen for an additional cost, or purchased separately.

• Direct Thread HUB Adapter (11/16×24, 5/8×24 or 1/2×28)

• PLAN-A™ Short Taper Mount HUB Adapter

Compatible with the following Taper Mount devices ONLY: EZ-Brake™ & Minimalist Brake. For use with longer Taper Mount Devices, please choose the Plan-A™ LONG HUB Mount Adapter

• PLAN-A™ Long Taper Mount HUB Adapter

Compatible with the following Taper Mount devices ONLY: Hammer Comp, Paladin Brake, Minimalist Stealth Flash Suppressor, Bayonet Micro Brake, EZ-Brake™, & Minimalist Brake.

• A2 HUB Mount Interface

Compatible with most mil-spec Colt-pattern A2 birdcages & ALL GATE-LOK™ Muzzle Devices (Excluding: GATE-LOK™ Stealth Flash Hider)

• GATE-LOK™ HUB Mount Interface

Compatible with most mil-spec Colt-pattern A2 birdcages & ALL GATE-LOK™ Muzzle Devices 

• DUAL-LOK® HUB Mount Interface

Compatible with ALL DUAL-LOK® Muzzle Devices (Excluding: Over-the-Barrel PSR™ Muzzle Devices & Bayonet Flash Hider)

MAINTENANCE ITEMS AVAILABLE:

• Bushwhacker® Spanner Wrench (Recommended for installing Griffin HUBs)
• Griffin GI Armorers Wrench
• Mount Adapter Driver
• Cleaning Brushes
• ST-3 Thread Sealant
• High Temp 2300 degree Anti Seize
• Alignment Rods (to verify proper installation)

WHAT’S IN THE BOX?

• Sportsman Ultra Light HD .46 Suppressor
• Choice of HUB Mount Interface (Optional)
• Branded Griffin pouch

CALIBER RATING :

The Sportsman Ultra Light HD™ .46 suppressor is rated up to .45-70 and .45 ACP pistol cartridges.

Sportsman Ultra Light HD™ suppressors do not have minimum barrel length restrictions or constraints for magnum rifle calibers. While longer barrels promote longer service life, there are no barrel length restrictions with this suppressor!

FEATURES :

• Industry-Standard 1.375×24 HUB Rear Threading
• Full 17-4 H900 Heat-Treated Stainless Steel Construction
• Tubeless Laser-Welded Design
• Patented ECO-FLOW™ baffle system for reduced gas blow back
• High-Temp Cerakote Finish
• Available in Black or FDE
• Perpetual Lifetime Warranty™

Manual

• CLICK HERE FOR MANUAL

Additional information